Mini Boden Pear Shirt Knockoff

Today I've got another "I could make that" project to share.  Read on to learn how to make your own Mini Boden look alike. 

You will need:

paper or freezer paper

a new or repurposed blank T-shirt

as few or as many colors of felt as you'd like

embroidery floss

needle

scrap of fusible interfacing

basic sewing essentials

Draw or trace a pear shape onto freezer paper (or regular paper) to create a pattern piece.  Cut as many pears are you like out of felt using your pattern piece.  **If you use freezer paper you can iron it directly onto the felt. It will stick and make cutting easier.

(See my tutorial for Freezer Paper Patterns)

Place the pears wear you'd like them on the shirt, then cut a piece of interfacing big enough to cover them. Flip shirt inside out and iron interfacing to wrong side of where you'll be placing your pears.

Pin the pears where you'd like them and use a fabric pencil to draw a stem and leaf on each fruit.  

Use an embroidery needle and embroidery floss (only 3 threads of the strand) to sew a running stitch up the center of each pear and continue along embroidering the stem and the leaf.

I only now realized I forgot to embroider seeds onto them. Perhaps I'll go back and do that, or maybe not ;)

I Could Make That: Urban Outfitter Lace Collar

who doesn't love a peter pan collar? Now you can add one to anything you're wearing.

Make you own in, like, 7 minutes:

Start with 18" of lace.

Cut it in half exactly and trim the bottom edges round or diagonal on both pieces.

Use some matching string to tie a knot and attach the two bottom corners.

Use more string to attach long ties to the inside corners on the top edges on both lace pieces and tie on like a necklace. 

I could make that: Clare Vivier Foldover Clutch

My friend Liz put a bug in my ear about making a foldover clutch.  I went on a cyber hunt and found these Clare Vivier clutches. They range from $165-$200 each, and so begins my blog series "I could make that". Words we've all muttered at some point while shopping, am I right?

To you make your own you will need:

Two 12"x 16" panels of exterior fabric (faux leather)

Two 11.5" x 15.5" panels of lining fabric (Amy Butler cotton)

 Magnetic closure

12" zipper

Basic Sewing essentials

Difficulty level: Intermediate

1. Install the magnetic closure according to the package directions 3" down and 6" in from the top and 4" up and 6" in from the bottom of your first exterior panel (don't be intimidated by the hardware, these are really simple to install)

2. Place the zipper facing down on to the right side of the same exterior panel, leaving 1/2" from the left side edge. (top left) The long edge of the zipper tape should sit 1/4" down from the top edge of the exterior panel.  Use your zipper foot and and stitch 1/8" from the zipper teeth, starting a stopping 1/2" from the side edges of the exterior panel.  Backstitch at both ends.  

**Tip: When I install a zipper, I pin it in place, then open the zipper halfway. I sew until I am about 2 inches from the zipper pull. I Take my project off the machine, zip the zipper back up and finish sewing where I left off. This helps me avoid a collision with the zipper pull.  Of course, when I am starting from the end of the zipper, I start with it closed, sew half way, then open it to finish.**

3. Now take one of the lining panels and place it right sides together with the exterior panel sandwiching the zipper between the two. (top right)  Pin in place, and sew over the same seam that attached the zipper originally (bottom right). Be sure to stop and start in the same spots (1/2" from the side edges). Backstitch at both ends.

Flip the lining over so the wrong sides of the fabric are together and use an iron to press it flat on the lining fabric. Be sure not to touch the faux leather with the heat.

4. Repeat steps 2 and 3 to attach the other two panels to the other side of the zipper. (shown above)

5. Separate the panels so the exterior panels are right sides together and the lining panels are also right sides together.  Pin them in place to begin sewing the panels.

**You can round the bottom corners, like I did in the photo above, by using a cup to trace the shape and then cut. Though, after making a few, I personally like the straight corners**

**leave your zipper half way open for this step**

6.Start by pushing the zipper seam allowance toward the exterior panels. Begin sewing at the starting point of the zipper seam and curve slightly out as you meet the side edges of the exterior panels and then sew 1/4" seam around the perimeter of the exterior panels and finish the way you began, with a slight curve up to the ending point of the zipper seam.  

(shown above)

7. Repeat with the the lining panels, but leave a 4 inch opening at the bottom of the lining panels to allow you to pull your clutch right side out.  

8. Pull your clutch right side out through the opening and press the lining with an iron so the raw edge of the opening turns in toward the wrong side of the fabric 1/4", then sew 1/8" away from the edge to close the opening.  Push the lining into the finished clutch and enjoy!!